Setting Server Options
The following command line parameters let you set Lyris configuration options. All these parameters can be changed from the "Server Configuration" Web Interface page. The command line
versions are included for convenience. For more information, see Server Config.
Set Lyris activation code Number to that specified on the command line.
Set Domain Name Server to the TCP/IP address specified on the command line. DNS Server.
Sets the email address of the administrator of this Lyris server.
Set mail forwarding rule to "ip-address port". See Forward Mail.
Add the TCP/IP address specified on the command line to the list of allowed LCP hosts.
Sets the TCP/IP port that Lyris accepts incoming LCP connections on. The default is 2020. See LCP Port.
Sets the password that the LCP protocol uses to log into this Lyris server.
Note: you must change the password= line of the lyris.plc file to match this password, if you do change it.
Specifies the TCP/IP addresses that this Lyris server is allowed to use. See Multiple TCP/IP addresses.
Specifies the TCP/IP address that you should use when you register your serial number to obtain an activation code.
Set URL that goes to Lyris Web Interface. See Lyris URL.
Displays the version of Lyris that are running.
Displays the command line help.
Sets the TCP/IP port that Lyris accepts incoming SMTP connections on. The default is 25. See SMTP Port.
Sets the TCP/IP port that Lyris accepts incoming NNTP connections on. The default is 119. See Newsgroup Port.